Numerical investigations in mixed friction systems

A Albers, B Lorentz, L Nowicki

Abstract


A numerical approach is here selected to investigate mixed friction phenomena where testing rigs cannot be used or need complex adaptations to deliver reliable measurements. The following work focuses on the numerical investigations of mixed friction systems combining fluid-solid and solid-solid interactions at the micro scale. Goal is to improve the accuracy of future macro models by applying them more precise boundary conditions derived from micro models. A three dimensional model is built in a Finite Elements (FE) software composed of one fluid lubricating two sliding rough surfaces. Both surfaces are generated according to a statistical method making use of measured technical surfaces. To model the interactions between the fluid and the solid structure, the Arbitrary-Lagrangian-Eulerian remeshing process is used. A model is built, based on an axial floating bearing on which the adhesion effects are the most present. Global friction coefficient between both lubricated solids is established using the FE solver and solid-solid friction can be separated from the fluid-solid friction with further post-processing operations.

Full Text:

PDF

References


ASME, Strategy for energy conservation through tribology, 1977

Hirt, C. W., An arbitrary Lagrangian-Eulerian computing technique, Proceedings of the Second International Conference on Numerical Methods in Fluid Dynamics, Springer, Berlin, 1971

Albers, A., Nowicki, L., Enkler, H-G., Development of a method for the analysis of mixed friction problems, International Journal of Applied Mechanics and Engineering, vol. 11, No. 3, pp. 479-490, 2006

Albers, A., Nowicki, L., Enkler, H-G., Methode zur Berechnung von geschmierten Friktionsproblemen in Mischreibungsgebieten, Gesellschaft Für Tribologie, 2006

Rometsch, R. and Letzner R-D., Rauheitsmessung, Theorie und Praxis, Hommelwerke GmbH, Schnurr Druck, 1993

DIN EN ISO 13565, Oberflächenbeschaffenheit: Tastschnittverfahren, Part 1 till Part 3. Hrsg, Deutsches, Institut für Normung. Berlin, Köln, Beuth-Verlag, 1997

Nowicki, L., Raue Oberflächen in geschmierten Tribokontakten, PhD Thesis, Band 30, University of Karlsruhe, 2008

Sundararajan, D., The Discrete Fourier Transform, World Scientific Publishing Co. Pte. Ltd., Singapore, New Jersey, London, Hong Kong, 2001

Kursawe, F. and Schwefel H-P., Optimierung mit Evolutionären Algorithmen, Automatisierungstechnische Praxis, vol.39 No.9, pp.10-17, 1997

Rechenberg, I., Evolutionsstrategie: Optimierung technischer Systeme nach Prinzipien der biologischen Evolution, Frommann-Holzboog, Stuttgart, 1973

Albers, A., Nowicki, L. and Minx, J., A method for the consideration of influences of the surface roughness on the behaviour and design of global systems, 15th International Conference on Engineering Design ICED 05, Melbourne, Australia, August 15th - 18th, 2005

Bowden, F. P., Tabor, D., Reibung und Schmierung feste Körper, Springer, Berlin, Göttingen, Heidelberg, 1959




DOI: http://dx.doi.org/10.1260/1750-9548.4.1.83

Copyright (c) 2016 The International Journal of Multiphysics