A finite volume study for pressure waves propagation in a straight section of pipeline with caviation

C Silva

Abstract


The main objective of this research was to study the pressure waves propagation generated by a sudden closure of a valve in a straight pipe. The physical model consisted of a head tank that can be pressurized with air, and a copper pipe with a fast-closing ball valve on the downstream end of the line. The cavitation and fluid-structure interaction phenomena were integrated analytically into the one-dimensional continuity and momentum equations, by assuming that the fluid density and the flow area vary with pressure. These equations were solved through a high resolution finite volume method, in combination with others numerical methods such as Taylor series expansion, Newton method, Simpson's Rule and quadratic interpolation. Due to the complexity of the solution procedure, a computational code in FORTRAN 95 language was developed in order to obtain numerical solutions. Several discretizations of the computational grid were achieved to assess their impact on the solution. The model was validated with experimental data and analytic results obtained by other researchers. Several pressure values, in different points of pipe, were compared, and an excellent agreement was found for both cases.

Full Text:

PDF

References


Tijsseling, A. S., Simpson, A. R., Bergant, A., Water Hammer with Column Separation: A Review of Research in the twentieth century, Journal of Fluids Engineering, 2005, Vol. 22 (2).

Da Silva, C., Estudio de Vibración en un Sistema de Tuberías de Codo Simple en Presencia de Cavitación, Mechanical Engineer, Universidad de Oriente, 2005.

Chaiko, M. A., A Finite-volume approach for Simulation of Liquid-Column Separation in Pipelines, Journal of Fluids Engineering, 2006, Vol. 128 (1324).

Leveque, R. J., Finite-Volume Methods for Hyperbolic Problems, Cambridge Texts in Applies Mathematics, Cambridge, United Kingdom, 2004.

Simpson A., y Wylie, E. B., Column Separation Experiments with Large Pressure Pulses, ASME Paper, 1987, (87-PVP-18).

Grandall, S. H., Dahl, N. C., and Lardner, T. J., An Introduction to the Mechanics of Solids, 2nd ed., McGraw-Hill, New York, 1972, (p. 94).

Linderburg, M. R., Mechanical Engineering Reference Manual, 11th ed., Professional Publications, Belmont, CA, 2001.

Tassi, P. A. y Engelberger, C. R., Introducción al Método de Diferencias Finitas.

Fe Marqués, J., Aplicación del Método de Volúmenes Finitos a la Resolución Numérica de las Ecuaciones de Aguas Someras con Incorporación de los Esfuerzos debidos a la Turbulencia, Universidad de Coruña, 2005.

Toro, E. F., Riemann Solvers and Numerical Methods for Fluid Dynamics, Springer, 1999.

Tijsseling, A., Fluid-Structure Interaction, Technical University of Eindhoven, 1993.




DOI: http://dx.doi.org/10.1260/1750-9548.7.4.259

Copyright (c) 2016 The International Journal of Multiphysics