Numerical simulation of explosive welding using Smoothed Particle Hydrodynamics method

J Feng, P Chen, Q Zhou, K Dai, E An, Y Yuan

Abstract


In order to investigate the mechanism of explosive welding and the influences of explosive welding parameters on the welding quality, this paper presents numerical simulation of the explosive welding of Al-Mg plates using Smoothed Particle Hydrodynamics method. The multi-physical phenomena of explosive welding, including acceleration of the flyer plate driven by explosive detonation, oblique collision of the flyer and base plates, jetting phenomenon and the formation of wavy interface can be reproduced in the simulation. The characteristics of explosive welding are analyzed based on the simulation results. The mechanism of wavy interface formation is mainly due to oscillation of the collision point on the bonding surfaces. In addition, the impact velocity and collision angle increase with the increase of the welding parameters, such as explosive thickness and standoff distance, resulting in enlargement of the interfacial waves.


Full Text:

PDF

References


Crossland, B., Explosive welding of metals and its applications, 1982. Oxford University Press, UK.

Blazynski, T.Z., Explosive welding, forming and compaction, 1985. Applied Science Publishers, London.

Gulenc, B., Investigation of interface properties and weldability of aluminum and copper plates by explosive welding method. Material and Design, 2008. 29(1): p. 275-278. Crossref

Manikandan, P., et al., Explosive welding of titanium/stainless steel by controlling energetic conditions. Materials Transactions, 2006. 47(8): p. 2049-2055. Crossref

Bina, M.H., Dehghani, F. and Salimi, M., Effect of heat treatment on bonding interface in explosive welded copper/stainless steel. Material and Design, 2013. 45: p. 504-509. Crossref

Manikandan, P., et al., Underwater explosive welding of thin tungsten foils and copper. Journal of Nuclear Materials, 2011. 418(1-3): p. 281-285. Crossref

Sun, W., Li, X.J. and Hokamoto, K., Fabrication of graded density impactor via underwater shock wave and quasi-isentropic compression testing at two-stage gas gun facility. Applied Physics A: Materials Science & Processing, 2014. 117(4): p. 1941-1946. Crossref

Mousavi, A.A.A. and Al-Hassani, S.T.S., Numerical and experiment studies of the mechanism of the wavy interface formations in explosive/impact welding. Journal of the Mechanics and Physics of Solids, 2005. 53(11): p. 2501-2528. Crossref

Mousavi, A.A.A. and Al-Hassani, S.T.S., Simulation of explosive welding using the Williamsburg equation of state to model low detonation velocity explosives. International Journal of Impact Engineering, 2005. 31(6): p. 719-734. Crossref

Wang, Y.X., et al., Numerical simulation of explosive welding using the material point method. International Journal of Impact Engineering, 2011. 38(1): p. 51-60. Crossref

Li, X.J., et al., Numerical study on mechanism of explosive welding. Science and Technology of Welding and Joining, 2012. 17(1): p. 36-41. Crossref

Wang, X., et al., Numerical study of the mechanism of explosive/impact welding using Smoothed Particle Hydrodynamics method. Materials and Design, 2012. 35: p. 210-219. Crossref

Chen, S.Y., et al., Atomic diffusion behavior in Cu-Al explosive welding process. Journal of Applied Physics, 2013. 113(4): 044901. Crossref

Liu, M.B. and Liu, G.R., Smoothed Particle Hydrodynamics (SPH): an Overview and Recent Developments. Archives of Computational Methods in Engineering, 2010. 17(1): p. 25-76. Crossref

Liu, G.R. and Liu, M.B., Smoothed Particle Hydrodynamics: A Meshfree Particle Method, 2003. World Scientific Publishing Co.

Liu, G.R. and Gu, Y.T., An Introduction to meshfree methods and their programming, 2005. Springer, Dordrecht.

Chen, P.W., et al., Investigation on the Explosive Welding of 1100 Aluminum Alloy and AZ31 Magnesium Alloy. Journal of Materials Engineering and Performance, 2016. 25(7): 2635-2641. Crossref

Bahrani, A.S., Black, T.J. and Crossland. B., The mechanics of wave formation in explosive welding. Proceedings of The Royal Society A, 1967. 296(1445): p. 123-136. Crossref

Cowan, G.R., et al., Mechanism of bond zone wave formation in explosion-clad metals. Metallurgical Transactions, 1971. 2(11): p. 3145-3155. Crossref

Cheng, C.M. and Tan, Q.M., Mechanism of wave formation at the interface in explosive welding. Acta Mechanica Sinica, 1989. 5(2): p. 97-108. Crossref

Kiselev, S.P., Numerical simulation of wave formation in an oblique impact of plates by the method of molecular dynamics. Journal of Applied Mechanics and Technical Physics, 2012. 53(6): p. 907-917. Crossref




DOI: http://dx.doi.org/10.21152/1750-9548.11.3.315

Copyright (c) 2017 J Feng, P Chen, Q Zhou, K Dai, E An, Y Yuan

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.