A New Methodology for Fuel Mass Computation of an operating Aircraft

M Souli, R Messahel, B Reynard, P Sinou

Abstract


The paper performs a new computational methodology for an accurate computation of fuel mass inside an aircraft wing during the flight. The computation is carried out using hydrodynamic equations, classically known as Navier-Stokes equations by the CFD community. For this purpose, a computational software is developed, the software computes the fuel mass inside the tank based on experimental data of pressure gages that are inserted in the fuel tank. Actually and for safety reasons, Optical fiber sensor for fluid level sensor detection is used. The optical system consists to an optically controlled acoustic transceiver system which measures the fuel level inside the each compartment of the fuel tank. The system computes fuel volume inside the tank and needs density to compute the total fuel mass. Using optical sensor technique, density measurement inside the tank is required. The method developed in the paper, requires pressure measurements in each tank compartment, the density is then computed based on pressure measurements and hydrostatic assumptions. The methodology is tested using a fuel tank provided by Airbus for time history refueling process.


Full Text:

PDF

References


Youngs, D. L, Time-dependent multi-material flow with large fluid distortion. Numerical Methods for Fluids Dynamics, ED Morton, Academic Press, 1982, New York (USA), K.W. Mortron and M.Jj. Baines edition.

Youngs, D. L., An interface tracking method for a 3d eulerian hydridynamics code. Technical report, Atomic Weapon Research Establishment, 1987, Aldermaston, Berkshire, United Kingdom.

Lopez, J., and Hernandez, J., Analytical and geometrical tools or 3d volume of fluid methods in general grids, Journal of Computational Physics, 2008, 227, 5939-5948. CrossRef

Osher, S., and Sethian, J. A., Front Propagating with Curvature-Dependent Speed: Algorithms Based on Hamilton-Jacobi, Journal of Computational Physics, 1988, 79, 12-49. CrossRef

Souli, M., and Benson, D. J., Arbitrary Lagrangian Eulerian and Fluid-Structure Interaction: Numerical Simulation, Wiley-ISTE, 2010. CrossRef

Enright, D., Fedkiw, R., Ferziger, J. and Mitchell, I., A Hybrid Particle Level Set Method for Improved Interface Capturing, Journal of Computational Physics, 2002, 183, 83-116. CrossRef

Sussman, M., and Puckett, E., G., A Coupled Level Set and Volume-of-Fluid Method for Computing 3D and Axisymmetric Incompressible Two-Phase Flows, Journal of Computational Physics, 2000, 162, 301-337. CrossRef

van der Pijl, S. P., Segal, A., Vuik, C. and Wesseling, P. A mass-conserving Level-Set method for modelling of multi-phase flows, International Journal for Numerical Methods in Fluids, 2004, 47(4), 339-361. CrossRef

Hallquist, J. O., LS-DYNA Theory Manual. LSTC, Livermore Software Technology Corporation, 2015, 7374 Las Positas Road; Livermore CA 94551 (USA).

Noh, W. F., and Woodward, P., Slic (simple line interface calculation), Technical report, Lawrence Livermore Laboratory, 1976, University of California, Livermore, California, USA. CrossRef




DOI: http://dx.doi.org/10.21152/1750-9548.10.1.99

Copyright (c) 2016 The International Journal of Multiphysics